TFL 1106Z Pursuit Racing Boat 3660/1620KV Motor 120A ESC RC Model Boat (ARTR) - Shaft Bracket Version
Features:
.Design: Battery motor integration. Motor and shaft support can be upgraded to improve performance according to your needs. Easy to maintain, just remove the shaft support and you can clean and fuel the soft shaft, etc
.Notice: First of all, before launching the model ship, it is necessary to check whether the screws in each part are locked and ensure that they are not loose, and check whether the transmission system maintains sufficient lubricating oil. Check whether the cooling water pipe is unblocked. When debugging remote control and testing electronic equipment, motor idling should not exceed 10 seconds. After the model ship is launched, it should be observed closely whether there is water discharge at the outlet on the side of the ship. If there is water discharge, the cooling system is normal. The next step is to fly your boat with the waves. Conversely, if there is no drainage, the cooling system needs to be checked immediately. After the ship model is used, please clear the water in the hold timely to ensure the interior is dry, so as to avoid damage to electronic equipment. Focus on cleaning the water in the transmission system, and apply anti-rust lubricating oil so that is can be stored for a long time
.For Ages: 14+
.Note: Servo, remote control, battery and charger are not included
Specifications:
Package Content:
.1 x RC Boat
Features:
.Design: Battery motor integration. Motor and shaft support can be upgraded to improve performance according to your needs. Easy to maintain, just remove the shaft support and you can clean and fuel the soft shaft, etc
.Notice: First of all, before launching the model ship, it is necessary to check whether the screws in each part are locked and ensure that they are not loose, and check whether the transmission system maintains sufficient lubricating oil. Check whether the cooling water pipe is unblocked. When debugging remote control and testing electronic equipment, motor idling should not exceed 10 seconds. After the model ship is launched, it should be observed closely whether there is water discharge at the outlet on the side of the ship. If there is water discharge, the cooling system is normal. The next step is to fly your boat with the waves. Conversely, if there is no drainage, the cooling system needs to be checked immediately. After the ship model is used, please clear the water in the hold timely to ensure the interior is dry, so as to avoid damage to electronic equipment. Focus on cleaning the water in the transmission system, and apply anti-rust lubricating oil so that is can be stored for a long time
.For Ages: 14+
.Note: Servo, remote control, battery and charger are not included
Specifications:
| Material | Imported Vinyl Resin (Glass Fiber) |
| Item | 1106Z Pursuit (Shaft Bracket Version ) |
| Hull Design | V-Shaped (O Boat) |
| Hull Size | 820 x 240 x 160mm |
| Motor | 3660/1620KV Motor, 120A ESC |
| Drive System | φ4.76 Struct Drive System (Mouse Tail) |
| Props | 2 Blade Alum. Propeller |
| Shaft System | 4.76mm |
| Shaft Bracket | 60mm |
| Rudder | 130 Rudder |
| Water Pressure Plate | 57mm |
| Water Knife | 55mm |
| Copper Paddle | 108 |
| Servo Recommeded | S3006 6KG (Not Included) |
| Remote Control Recommeded | Flysky FS-GT2E，FS-GT3B (Not Included) |
| Battery | 14.8V 4400Hah 40C Li-Po or Higher Capacity |
| Product Size | 82 x 24 x 16cm |
| Product Weight | 3000g |
| Package Dimensions | 103 x 33 x 20cm |
| Package Weight | 3800g |
| Packing | Box |
Package Content:
.1 x RC Boat