D1RC DRR-02 RC Electric Drift Model Fiber Car Frame
Features:
.DRR-02 frame is mainly composed of wave fiber board and metal. It uses up to 8 wave fiber boards and has extremely high elasticity.
.Rear Drive: The rear-drive drive scheme of the motor is adopted. Compared with the drift car of the middle motor, the advantages of the rear motor are the same as the RR layout of the real car. The front and rear weight ratio of the body is adjusted to make the center of gravity more lean. Later, with the addition of straight shaft accessories, the car is better in the process of drifting. The ultra-simple and flexible belt drive output is more delicate, can reduce noise, has overload protection, and has a 2.6-8.9 large gear adjustable area.
.Suspension: The front of the shock absorber is 49mm and the rear is 57mm. The main body of the shock absorber is machined from 6061T6 aluminum alloy CNC. The shock absorber is plated with hardened anode to improve the surface finish and hardness. Friction loss.
.Double Wishbone Suspension: By adjusting the length of the upper rod, you can adjust the camber of the front wheel toe and four wheels.
.85 ° Large Steering: DRR-02 has a maximum steering angle of 85 °, and the steering shaft is fixed by bearings. The choice of different steering seats can be used to change the caster angle of the kingpin. Steering kingpin camber angle is of great significance to the steering of the vehicle. It determines the stability of the vehicle when driving straight and fast. On the other hand, it determines the strength of the steering wheel when turning.
.Steering to Block C: Block C is made of CNC aluminum alloy with higher strength. It also has a brake caliper position to make players drift cars better.
Specifications:
.Color: As Shown
.Material: CNC Aluminum Alloy + Wave Fiber Board
.Brand: D1RC
.Drive: Rear Drive
.Wheelbase: 260mm-265mm(Adjustable)
.Frame Size: 423 x 190mm
.Product Weight: 1114g
.Package Dimensions: 46.5 x 20.5 x 8.5cm
.Package Weight: 1200g
.Packing: Graphic Carton
Package Content:
.1 x Car Frame
Features:
.DRR-02 frame is mainly composed of wave fiber board and metal. It uses up to 8 wave fiber boards and has extremely high elasticity.
.Rear Drive: The rear-drive drive scheme of the motor is adopted. Compared with the drift car of the middle motor, the advantages of the rear motor are the same as the RR layout of the real car. The front and rear weight ratio of the body is adjusted to make the center of gravity more lean. Later, with the addition of straight shaft accessories, the car is better in the process of drifting. The ultra-simple and flexible belt drive output is more delicate, can reduce noise, has overload protection, and has a 2.6-8.9 large gear adjustable area.
.Suspension: The front of the shock absorber is 49mm and the rear is 57mm. The main body of the shock absorber is machined from 6061T6 aluminum alloy CNC. The shock absorber is plated with hardened anode to improve the surface finish and hardness. Friction loss.
.Double Wishbone Suspension: By adjusting the length of the upper rod, you can adjust the camber of the front wheel toe and four wheels.
.85 ° Large Steering: DRR-02 has a maximum steering angle of 85 °, and the steering shaft is fixed by bearings. The choice of different steering seats can be used to change the caster angle of the kingpin. Steering kingpin camber angle is of great significance to the steering of the vehicle. It determines the stability of the vehicle when driving straight and fast. On the other hand, it determines the strength of the steering wheel when turning.
.Steering to Block C: Block C is made of CNC aluminum alloy with higher strength. It also has a brake caliper position to make players drift cars better.
Specifications:
.Color: As Shown
.Material: CNC Aluminum Alloy + Wave Fiber Board
.Brand: D1RC
.Drive: Rear Drive
.Wheelbase: 260mm-265mm(Adjustable)
.Frame Size: 423 x 190mm
.Product Weight: 1114g
.Package Dimensions: 46.5 x 20.5 x 8.5cm
.Package Weight: 1200g
.Packing: Graphic Carton
Package Content:
.1 x Car Frame