1:10 Model Car Engine Gearbox with Pulley Rack and Screw Glue for Toyan FS-S100 FS-S100G FS-S100（W）FS-S100G(W)
Features:
.1:10 model car universal accessories, also adapted toyan FS-S100, FS-S100G, FS-S100 (W) / FS-S100G (W), but the original gear clutch must be removed, with the wheel clutch, for Modified gearbox
.The product needs to be equipped with a pulley clutch to be used with the gearbox. The pulley clutch can be purchased separately in the store.
.The function of the product is to make the engine have the functions of forward, reverse and neutral, so that the car model and the ship model have the same function of forward, backward and neutral as the real car and the ship.
.The whole is made of all metal material, the speed ratio is 2.3 and 2.4, the clutch principle, the lever control, the input and output two shafts are 5mm diameter, the pinion input gear output
.Dimensions: Total length of shaft with shaft 70mm, total length of rod with rod length 86mm, width 40mm
.The product is not a special accessory. It needs to be modified according to the frame and engine. There is no uniform installation instructions. The requirements for hands-on ability are relatively high. No specific technical support is provided.
.Suitable for people over 15 years old
Specifications:
.Color: As Shown
.Material: Metal
.Product Weight: 250g
.Package Dimensions: 13 x 8 x 9cm
.Package Weight: 300g
.Packing: Bag
Package Content:
.1 x Model Car Engine Gearbox with Pulley Rack and Screw Glue
Features:
.1:10 model car universal accessories, also adapted toyan FS-S100, FS-S100G, FS-S100 (W) / FS-S100G (W), but the original gear clutch must be removed, with the wheel clutch, for Modified gearbox
.The product needs to be equipped with a pulley clutch to be used with the gearbox. The pulley clutch can be purchased separately in the store.
.The function of the product is to make the engine have the functions of forward, reverse and neutral, so that the car model and the ship model have the same function of forward, backward and neutral as the real car and the ship.
.The whole is made of all metal material, the speed ratio is 2.3 and 2.4, the clutch principle, the lever control, the input and output two shafts are 5mm diameter, the pinion input gear output
.Dimensions: Total length of shaft with shaft 70mm, total length of rod with rod length 86mm, width 40mm
.The product is not a special accessory. It needs to be modified according to the frame and engine. There is no uniform installation instructions. The requirements for hands-on ability are relatively high. No specific technical support is provided.
.Suitable for people over 15 years old
Specifications:
.Color: As Shown
.Material: Metal
.Product Weight: 250g
.Package Dimensions: 13 x 8 x 9cm
.Package Weight: 300g
.Packing: Bag
Package Content:
.1 x Model Car Engine Gearbox with Pulley Rack and Screw Glue