Enjomor V8: What you need to know | Stirlingkit

A 9000 RPM DOHC (Double Overhead Cam) Guangsu V8 gasoline engine is a high-performance engine that is characterized by having 8 cylinders arranged in a V configuration and a maximum engine speed of 9000 revolutions per minute. This type of engine is typically found in high-performance sports cars, muscle cars, and racing vehicles, and is known for delivering high levels of power and acceleration. They typically run on gasoline fuel, which is easily accessible and offers good power density, but also produces higher emissions compared to alternative fuel sources.

NOTE: If you have any questions about this engine, please comment below or contact us via service@stirlingkit.com. We will update the Q&A of Enjomor guangsu v8 engine in this blog in time.

Instruction Manual：click here

1. How to Adjust Your Enjomor V8 Engine Timing?

Please read the this blog.

How to Adjust Your Enjomor V8 Engine Timing | Stirlingkit.com

2. How to hook up all the modules to start the motor?

Please check the folllowing two wiring instruction pictures.

Starter kit: click here.

3. What is the Firing order?

Please check the picture below.

4. Carburetor Adjustments

Try not to touch the carburetor at first, try to ignite it first, and then fine-tune according to the ignition reaction. The adjustment of the oil needle in the instruction manual is only roughly determined, because the angle of adjustment of the oil needle adjustment screw of each batch of carburetors is different, and the specific data cannot be determined. This needs to be adjusted slowly after the engine is ignited, depending on the ignition situation, and it is best to adjust until the engine ignites sound smoothly and the accelerator responds quickly.

Related info is at Page 6 in the manual.

5. How to connect the Metal Fixed Base with Radiator Set for ENJOMOR V8 78cc GS-V8 Engine Models?

First, Water temperature sensor.

The two wires provided are color-coded as red for positive and black for negative. The black wire sensor is directly connected to the water tank.

Second, Tachometer.

Behind the tachometer, there are marking colors and wiring present.

Third, the two wires of the water exhaust fan are connected in parallel and then connected to the electrical supply.

People Often Ask

1. Interested in knowing what everyone is running for voltages on the enjomor v8? what are you doing in the ignition and speed control?

If you would prefer V8 engine model kit, we have Toyan v8 engine.

Other blogs of the ENJOMOR V8 engine model you may wanna read.

Enjomor GS-V8 Gasoline Engine Full Review by Dennis Dempsey | Stirlingkit

How to Adjust Your Enjomor V8 Engine Timing?

ENJOMOR V8 Production Status Update | Stirlingkit

Enjomor V8 Engine Plan Might Release This Year | Stirlingkit